Many times, caliber change, gradient change, material change, etc. are overlooked by video inspections. Linking a single inspection with two pipeline sections is solving this issue.
If a video inspection AB (orange) passes two pipeline sections A+B (black), it can be processed with one single GEONIS Sewer System inspection.
Requirement: GEONIS Main menu > Tools > SW module settings > Network logic > Priority assignment: Inspection to pipeline section = By pipeline section names, then by manhole numbers
In addition, the GNSEW_DEFINITION table must be loaded into GEONIS and adjusted as follows:
Original:
New:
Solution: Since both pipeline sections have their own designation (A+B) the alternative designation must be the same for both pipeline sections (AB).
Workflow: This way the inspection of damages can be processed the usual way.
Comments
0 comments
Article is closed for comments.