E-Size Print Template

Permanently deleted user

29. Juni 2011 03:38

Hi,

I created a E-size (44x34) print template by setting the Printer Setup in the Report Designer, and set Margins as top: 0.75, bottom: 0..75, left: 0.75, and right: 0.75 in the Page Setup. However, when I tried to print using the template, I got an error message: "The Margins are too large" . Even when I changed the margins from 0.75 to 0.25, I still get the same error message. Any ideas?

Thanks,

Yuying

0

• 

  Permanently deleted user

  11. Juli 2012 03:50

   

  I have a similar large format printing problem.  It seems that not matter what I do, I get the "Margins are too large" error dialog box.  I set the margins to .25; I shrunk the map components to be 2 inches inside the margins, yet I am still getting the same error. 

  If you have succeeded in getting a C,D, or E print template to work could you share your settings?

   

  Thanks

  Jorge

   

  0
• 

  Permanently deleted user

  10. August 2012 22:52

  When are you getting the error message? When clicking Create File in your site or when trying to print the resultant file?

  I have successfully created an E-sized template and using it in both Essentials 3.8 and 3.9 Silverlight sites. Width is defined as 43" with height only defined in Detail1 as 33" (headers and footers are 0") and the printer paper size in Settings set to 44" x 34".

  0
• 

  Permanently deleted user

  9. Mai 2013 01:23

  I had a lot of issues with this too!  I was setting all my margins (File > Report Settings > Page Setup), but I also needed to change the Printer Settings (File > Report Settings > Printer Settings).  Once I chose the E paper size in the Printer Settings, it stopped giving me errors about the margins.

  0
• 

  Dan Giersz

  9. Oktober 2014 23:31

  I also can't get the large format printing to work.  Trying to make a size E template.  The paper size is set to E (34x44), the margins are set to 0.5, and the report width is set to 43, the contents of the template are 32.25x42.5.  There should be plenty of room. Yet we continue to get the "Print error: Exception has been thrown by the target of an invocation. Margins are too large" error.

  We also took a working 11x17 print template and changed the paper size to size E and we still get the error.

  Any assitance on the appropriate settings to get large format plotting working would be appreciated...

   

  0

Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.